The Exclusionary Filler Masterbatch for Non-woven Fabric Solutions
These non-woven fabrics are largely used to get rid of the weeds, protect the top layer of the soil during the soil erosion, and to keep your garden clean and free of dust. When there is soil erosion, the non-woven geotextile, will act as a filter, which will not allow the soil to pass by, and thus prevent your garden or farm from losing its fertility layer. Geotextile fabrics also offer frost protection to the young seedlings, and to the plants that cannot survive cold
Suggested Usage Rate
Non-woven Filler Masterbatch
Compatibility: PP, LLDPE, LDPE, PE, HDPE
Non-woven fabrics are porous in nature and are highly flexible, which consist of more than one fiber layer. Non-woven fabrics will be mostly, the geotextiles, for which the raw materials are, polypropylene, polyethylene or polyester. These are also known to be more stable, when compared to other forms of fabric.
Following is our filler masterbatch granules for non-woven fabrics
Cost savings, it’s suitable for stiff non-woven fabric. This product has good dispersion, free of agglomeration, resistance die build up, improve elongation and strength and bring for the end product more whiteness, more glossy and more stiffness.
Cost savings, good quality, General purpose for PP woven sack & FIBC with low denier and medium running speed (below 350 rpm), improve processing and output, prinitability, whitenss, gloss
High level type
High quality, it’s suitable for stiffer non woven fabric. This product has good dispersion, free of agglomeration, resistance due to build-up, improve elongation and strength and bring for the end product more whiteness, more glossy and more stiffness
The clients’ requirements will determine the particle size, properties and characteristics of filler masterbatch granules
Packaging & Delivering
- 25 kgs per PE/PP bag
- 1200kgs/jumbo bag
- Our Filler Masterbatch plastic granules are quite sensitive to be moisture
- Storing in original packing bags is acceptable
- Please pay attention to the due of using after open the packing bags, the most appropriate time is making to use immediately after opening the product bags.
- In the case, the products have some moisture problems, please dry them out by hot air recycle machine with degree around 90 Celsius degree into a half of an hour or you can give out 1% desiccant filler masterbatch before making to use